Skip to main content

Sony ICF-EX5

 I was going to post Nothing much of interest on the modern radio front recently but then I remembered I'd refurbished a few 60 year old Channel Master germanium transistor sets as well as a more recent Panasonic RF1650 and RF1680. 

I've always been curious about the Japanese market Sony ICF-EX5MKII. Not generally available in the UK or US but plenty of (expensive) stock from Japanese resellers. Then I managed to get one via eBay in the US, but unfortunately it arrived looking like it had a hard life and with a detached speaker (despite the seller packaging it well).

Speaker dropped out!

That's torn it!

Fortunately It's a standard 4" boom box speaker so I've ordered a  (JVC) replacement. 

Meanwhile I re-assembled it and it gives a reasonable account of itself. Not convinced the sync detector is the best I've used but it sounds nice even with a torn cone.

I noticed reading Jay Allen's blog that he had a similar speaker detachment issue but his appears to have survived better than this one. 

Recently, I realised this isn't a MK2, it's a MK1 which dates back to 1984. A MK2 may soon appear though.

Comments

Post a Comment

Popular posts from this blog

Tecsun R-9700DX Teardown

I've seen a lot of favourable comments on this analogue SW radio via various YouTube channels, along with it's sibling the R-9710. Sold in some (USA?) markets as the Grundig Yacht Boy 250. Exact specifications and schematics have evaded me so far, however I did find a teardown and comparison at RadioIntel.com from which I've borrowed this photo: Photo from http://www.radiointel.com/review-review-tecsunr9700dx.htm It appears to use dual-conversion on shortwave with a fixed crystal local oscillator (see the 10 crystals above the bandswitch). One feature is that the tuning on the short wave bands tune the opposite direction to the AM and FM bands. Here's my (incorrect) guess of how it works. AM band IF is 450kHz (from the orange block filter)  AM local oscillator tunes 975kHz - 2160kHz. The image of the AM band (1425kHz - 2610kHz) is used as a tuneable first IF for the shortwave bands. Each band is 600kHz wide so it probably uses 2000kHz - 2600kHz. The SW ba...
1 comment
Read more

Tecsun R-9710 Teardown

Although I've been itching to get my hands on the Tecsun R-9700DX, I wasn't really aware of it's smaller sibling, the R-9710 until I saw this review on the Two Hands and a Radio YouTube channel. Two Hands made the observation that the shortwave bands tune in the opposite direction to the AM and FM bands, which made me go and do a quick check other Tecsun analog radios. I found the R-9700DX also has this inverted tuning feature so some Googling later and I've located a teardown of the R-9710 plus other sets. The original article is in Chinese but you can view it through the magic of Google Translate . R-9710 teardown from http://www.leowood.net/sbdp209.htm Note it has eight crystals around the bandswitch for that fixed-crequency first local oscillator. Add the schematic found at http://www.fmdiy.com/ReadNews.asp?NewsID=305 More dead links to maintain unfortunately.
Post a Comment
Read more

Tesco RAD-108 AM/FM/Shortwave portable radio review - American Style

I sent one of the RAD-108s over to Two Hands and a Radio for a YouTube review. Update - looks like 2H has taken his YouTube channel down so this is no longer available. Here is mine, a poor substitute.   It didn't do too well on the American AM broadcast band, probably due to tuning in 9kHz rather than 10kHz steps!
Post a Comment
Read more